-
FULL WAVE CONTROL ELECTRONICS
FULL WAVE CONTROL ELECTRONICS
The electronic control ensures continuous adaptation of the motor output to the load during drilling. The advantages are high performance at low speed and a steady sequence. If load peaks should be too high, the electronic torque control will be activated in order to prevent tool breakage and avoidable damage. An active contribution to employee safety with BDS machines. -
CARBON BRUSH INDICATOR
CARBON BRUSH INDICATOR
The machines of the Profi-PLUS class are provided with a new visual wear control for the carbon brushes. By replacing the worn carbon brushes in time, you will protect the motor of your machine from damage. -
SPEED & TORQUE CONTROL
SPEED & TORQUE CONTROL
The BDS ProfiPLUS class magnetic drilling machines are equipped with Speed & Torque control potentiometer to help you get the exact RPM and also the required torque while drilling, tapping, racing or countersinking. -
OIL BATH GEARBOX
OIL BATH GEARBOX
BDS offers a wide range of highly efficient magnetic core drilling machines with powerful and durable motors. The spectrum ranges from 800 W to 2,300 W. They are designed for the high performance requirements of the magnetic core drill technology. BDS manufactures machines with multi-stage gearboxes, which are completely embedded in oil. BDS magnetic core drilling machines are robust and reliable. -
INTERNAL LUBRICATION
INTERNAL LUBRICATION
Cutting oil where it is required. This principle always ensures the exact amount and even distribution over the entire cutting area. No dry running and overheating of the drill, no excessive use of coolant. Tool service life and work results will be significantly improved. -
KEYLESS QUICK-CHANGE DRILL CHUCK
KEYLESS QUICK-CHANGE DRILL CHUCK
It helps reduce tool change time and avoid tool brackage. No need for screwing to tighten the annular cutters. Avoid accidents due to loosing of screws. -
SWIVEL BASE
SWIVEL BASE
The Swivel Base is an adjustment device on BDS magnetic core drilling machines. To use it: Bring the machine roughly into position, activate the magnet, disable the Swivel Base locking mechanism and now adjust the machine exactly. A relief, especially for overhead or horizontal work. -
INTEGRATED COOLING TANK
INTEGRATED COOLING TANK
The BDS Magnetic core drilling machine of professional range are equipped with integrated cooling tank which provides continuous lubrication while drilling. The tank is integrated in the body of the machine so designed that it looks as one unit. -
COMPLETE INTERNAL CABLING
COMPLETE INTERNAL CABLING
BDS Magnetic Core Drilling Machines are safe to handle. Due to internal cabling, cables are protected against tearing-off. -
LARGE SAFE SWITCHES
LARGE SAFE SWITCHES
The large switches for motor and magnetic power are separated and safe to handle, i.e., confusion is impossible and accidents are prevented. Thanks to the construction of the switch, unintended actuation of the motor switch is prevented. -
MAGNET INDICATOR
MAGNET INDICATOR
The load configuration and the reserves of the electromagnet are exactly adapted for the performance of the respective magnetic core drilling machine. The user is informed by a visual control. LED green: The magnetic adhesion meets the minimum requirements. LED red: The magnetic adhesion is not sufficient, because it is reduced due to low material thickness or a coat of lacquer, forge scale or zinc. -
REVERSIBLE MOTOR
REVERSIBLE MOTOR
The reversible motor is an essential feature for thread cutting or tapping. Reversible motor makes it easy to remove the taps without damaging the threads. The left hand tap is also possible with the reversible motor. -
SINGLE PHASE MACHINE
SINGLE PHASE MACHINE
All the BDS magnetic drills work on a single-phase power supply. Single-phase is more widely available in residential settings and is less expensive to purchase than three-phase power units.
MAB 1300
MAB 1300
MAB 1300
MAB 1300
MAB 1300
MAB 1300
MAB 1300
MAB 1300
Magnetic core drilling machines with all performance characteristics for plant construction and engineering: With full wave control electronics, CW/CCW operation, multi-stage gear reductions, torque control, KEYLESS quick-change drill chuck system, and many more.
The best entry into a successful technology where the professional user can expect well-engineered, robust machines built for continuous service. Satisfy yourself as to the BDS quality Made in Germany
High performance – low price. BDS Maschinen is looking to fill a gap with this new machine concept for professional users who cannot compromise on quality or performance, but who are able to forgo comfort and fittings for the benefit of good prices.
-
RailMAB 965
-
RailMAB 915
-
AirMAB 5000PRO
-
MAB 155PRO
-
MAB 1300 V
-
MAB 825 V / MAB 845 V
-
AutoMAB 450
-
AutoMAB 350
-
MAB 825 KTS
-
PipeMAB 525
-
PipeMAB 200
Special magnetic core drilling machines assist with specific tasks: use in very tight drilling situations, drill with compressed air, drill rail profiles with electricity or petrol drive.
