MAB 525

MAB 525

Ø 50 mm Core Drilling  & M20 Tapping Magnetic Drilling/Tapping Machine

Technical Specs

Core drill short 30 mm (1-3/16")
12-50 mm (1/2" - 1 31/32'')
Core dril long 55 mm (2-11/64")
12-50 mm (1/2" - 1 31/32'')
Core drill extra-long 110 mm (4-21/64")
18 -50 mm (45/64" - 1 31/32")
Thread cutting
<= M20 (15/16")
Countersinking
<= 50 mm (1-31/32")
Reaming
<= 20 mm (25/32")
Twist drilling
<= 20 mm (25/32")
Friction clutch
Permanent internal lubrication
Speed range 1
70 - 280 min-1
Speed range 2
180 - 580 min-1
Speed range 3
----
Speed range 4
----
Morse taper
MT 3
Quick change drill chuck-system
Keyless 19 mm
Industrial arbor
----
Direct arbor
----
Weight
16 Kg (35 lbs)
Magnet Size
90 x 180 x 48,5 mm
Stoke
160 mm (6-19/64")
Voltage
230 V or 110 V AC
Motor Output
1600 Watt (14.5 Amp)
Swivel Base
----
Carbon brush wear control
CW/CCW rotation
Overheating protection
Magnet indicator
Full wave control electronics
Torque Control

Magnetic Drilling/Tapping Machine MAB 525 - Robust and lightweight! With two-stage oil bath gearbox, thread cutting up to M 20. The advantages of the MAB 525 MAB 525 Magnetic Drilling/Tapping Machine - > Best choice for service work: Total weight only 16 kg, > With MT 3 tool holder and a drilling performance of up to ø 50 mm, > Torsion-resistant design, monoblock gearbox, and slide.

The heavy-duty MAB 525 Magnetic Drilling/Tapping Machine is an allrounder magnetic drilling/tapping machine which performs DRILLING, THREAD CUTTING, COUNTERSINK & REAMING. The premium features of MAB 525 Magnetic Drilling/Tapping Machine are Carbon Brush Indicator which informs the operators in an advance time to change the worn out carbon brushes, this helps in avoiding the damage of the armature.

The other feature if Reversible Motor which helps the MAB 525 Magnetic Drilling/Tapping Machine to perform thread cutting (tapping) operations very easily. With the Reversible Motor, the quality of the threads made does not get damaged. MAB 525 Magnetic Drilling/Tapping Machine is also equipped with intelligent Overheat Protection which prevents the machines from getting damaged due to overheating and also increases the life of armature and field coil.. the Magnet Indicator on the MAB 525 Magnetic Drilling/Tapping Machine indicates the operator if the machines' magnetic is properly magnetizes on the material to be drilled or not. The Fully Wave Control Electronics feature of the MAB 525 Magnetic Drilling/Tapping Machine delivery constant steady power while drilling. The MAB 525 is a Morse Taper 3 (MT3) machine and can use twist drill bits with taper shank up to 20 mm diameter.

The MAB 525 Magnetic Drilling and Tapping Machine is a speed gearbox machine equipped with oil bath gearbox. An oil bath gearbox is the most sophisticated gearbox available in a magnetic drilling machine and has a very long service life compared to grease gearbox. The MAB 525 Magnetic Drilling & Tapping Machine comes with a KEYLESS drill chuck for easily changing the annular cutters with Weldon shanks. The weight of MAB 525 Magnetic Drilling/Tapping Machine is just 16 Kg (35 lbs.) and the working stroke is 160 mm (6 19/64'').

The MAB 525 is also available with a swivel base option as model number MAB 525SB.

50 mm

Diameter Drilling

M 20

Tapping Capacity

1600 Watt

Powerful Motor

16 Kg

Weight

1-31/32"

15/16"

14.5 Amp

35 lbs.

Two-stage oil bath gearbox

Core drilling up to 50 mm

Reversible motor

Magnet indicator

MT 3 Morse Taper

Safe switches

Complete internal cabling

Full wave control electronics

1 Quick change drill chuck

1 Tapping adapter ZGA 010 + ZGA 012 + ZGA 016

1 Ejector pin ZAK 075 + 090

1 Hard protective case

1 Safety chain

1 Drill drift MT 3

1 Gear rim drill chuck ø 13 mm

1 Taper drift MT 3/B16

1 Operating manual

Product Videos