MAB 485 SB

MAB 485 SB

Ø 40 mm Core Drilling & M16 Tapping with Swivel Base

Technical Specs

Core drill short 30 mm
12-40 mm
Core dril long 55 mm
12-40 mm
Core drill extra-long 110 mm
Thread cutting
<= M16
<= 40 mm
<= 18 mm
Twist drilling
<= 18 mm
Friction clutch
Permanent internal lubrication
Speed range 1
50 - 250 min-1
Speed range 2
180 - 450 min-1
Speed range 3
Speed range 4
Morse taper
MT 2
Quick change drill chuck-system
Industrial arbor
Direct arbor
13 Kg
Magnet Size
84 x 168 x 41,5 mm
160 mm
230 V or 110 V AC
Motor Output
1150 Watt
Swivel Base
Carbon brush wear control
CW/CCW rotation
Overheating protection
Magnet indicator
Full wave control electronics
Torque Control

The Made in Germany MAB 485 SB magnetic drill is the best introduction to the ProfiPLUS category magnetic drill- with the swivel base adjusting feature. Tangible relief for operators when performing drilling works overheard or in horizontal situations. A good idea comes to life: BDS now offers four magnetic drill s with a moveable magnetic adjustment feature in two performance categories. How the swivel base works: place the magnetic drill roughly in position, activate the magnet, release the adjustment feature and adjust it effortlessly. The swivel base enables the drill to be placed in exactly the right position without needing to hold the whole weight of the magnetic drill at the same time. This relief is an additional factor in work safety even when the magnetic drill is secured with a chain. The advantages of the MAB 485 Swivel Base magnetic drill Continuous electronic control of motor output and speed, drilling with core and twist drills, countersinking, reaming, thread cutting. Two-stage gear unit, non-destructive with oil bath gearbox. With Swivel Base, the adjustment feature for an easy positioning of the drill.


Diameter Drilling


Tapping Capacity


Powerful Motor



Swivel Base adjustment feature

Two-stage oil bath gearbox

Full wave control electronics

Reversible motor

Magnet indicator

MT 2 Morse Taper

Safe switches

Complete internal cabling

1 Quick change drill chuck

1 Tapping adapter ZGA 010 + ZGA 012 + ZGA 016

1 Ejector pin ZAK 075 + 100

1 Hard protective case

1 Safety chain

1 Drill drift MT 2

1 Gear rim drill chuck 1 – 13 mm

1 Taper drift MT 2/B16

1 Operating manual

Product Videos