MAB 455

MAB 455

Ø 40 mm Core Drilling & 55 mm Cutting Depth

Technical Specs

Core drill short 30 mm
12-40 mm
Core dril long 55 mm
12-40 mm
Core drill extra-long 110 mm
Thread cutting
Twist drilling
<= 18 mm
Friction clutch
Permanent internal lubrication
Speed range 1
250 min -1
Speed range 2
450 min-1
Speed range 3
Speed range 4
Morse taper
MT 2
Quick change drill chuck-system
Industrial arbor
Direct arbor
13 Kg
Magnet Size
84 x 168 x 41,5 mm
160 mm
230 V or 110 V AC
Motor Output
1150 Watt
Swivel Base
Carbon brush wear control
CW/CCW rotation
Overheating protection
Magnet indicator
Full wave control electronics
Torque Control

The made in Germany, 40 mm dia. drilling with morse taper 2 heavy duty magnetic base drilling machine. Powerful & Reliable 10.5 Amp double-insulated motor, 17-1/4" high, 29 lbs., High-speed, 2-speed oilbath gearbox, ideal for annular cutters and twist drills, Designed for continuous use, Intelligent electronic torque control, Drill up to 2" dia., Uses annular cutters, Twist drilling up to 7/8" diameter, Integrated cutting oil reservoir, Automatic internal lubrication, Swivel base (model MAB 455 SB), Keyless Cutter Mount, Quick-change keyless cutter system for 3/4" Weldon shank, Integrated Safety, Green/Red LED magnetic force indicator for safe operation, Internal cable routing, Simple, ergonomic arrangement of controls for one-handed operation, Emergency-off function. The motor gearbox of the BDS magnetic drilling magnetic base drilling machines are made of oil bath unlike the grease or fat gearbox from other manufacturer. The disadvantage of grease or fat gearbox is that when the grease is in Solid state the gearbox the completely filled with grease but, after working with the magnetic base drilling machine the gearbox of the magnetic base drilling machine gets heated up changing the solid Druckstate of grease to liquid state. In liquid state the level of grease decreases and there is no lubrication for the upper gears, which thus in time damages the gearbox. The advantage of BDS oil bath gearbox is that oil in cold or hot temperature is always in liquid state, hence oil always provides lubrication to upper as well as lower gears, thus increasing the service life of the magnetic base drilling machine drastically.


Diameter Drilling


Cutting Depth


Powerful Motor



Two-stage oil bath gearbox

Magnet indicator

Protected internal cabling

Permanent internal lubrication

Safe switches

Complete internal cabling

Quick Change drill chuck

Integrated cooling tank

1 Quick change drill chuck

1 Ejector pin ZAK 075 + 100

1 Hard protective case

1 Safety chain

1 Drill drift MT 2

1 Operating manual

Product Videos