MAB 485

MAB 485

Ø 40 mm Core Drilling  & M16 Tapping Magnetic Drilling And Tapping Machine

Technical Specs

Core drill short 30 mm (1-3/16")
12-40 mm (1-37/64")
Core dril long 55 mm (2-11/64")
12-40 mm (1-37/64")
Core drill extra-long 110 mm (4-21/64")
-------
Thread cutting
< M16 (15/16")
Countersinking
< 40 mm (1-37/64")
Reaming
< 18 mm (0-45/64")
Twist drilling
< 18 mm (0-45/64")
Friction clutch
-------
Permanent internal lubrication
Speed range 1
50 - 250 min-1
Speed range 2
100 - 450 min-1
Speed range 3
---------
Speed range 4
--------
Morse taper
MT 2
Quick change drill chuck-system
keyless 19 mm
Industrial arbor
-------
Direct arbor
------
Weight
13 Kg (29 lbs)
Magnet Size
84 x 168 x 41.5 mm
Stoke
160 mm (6-19/64")
Voltage
230 V or 110 V AC
Motor Output
1150 Watt (10.5 Amp)
Swivel Base
-------
Carbon brush wear control
CW/CCW rotation
Overheating protection
Magnet indicator
Full wave control electronics
Torque Control

The best entrance into the ProfiPLUS class of Magnetic Drilling And Tapping Machine – indispensable in the workshop and when being away on a job. The All in One MAB 485 is an ideal machine for DRILLING, TAPPING, COUNTERSINK & REAMING.

The MAB 485 Magnetic Drilling And Tapping Machine is equipped with 1150 watt (10.5 Amp) powerful German make motor which is available in 230 Volts as well as in 110 Volts at 50-60 Hz. The stroke of the MAB 485 Magnetic Drilling And Tapping Machine is 160 mm (6 19/64''). The lightweight MAB 485 Magnetic Drilling And Tapping Machine weights just 13 Kg. (29 lbs.).

The premium feature of these magnetic drilling and tapping machine is that it is equipped with KEYLESS drill chuck system. The MAB 485 Magnetic Drilling And Tapping Machine is a two-speed gear machine with an innovative oil bath gearbox for the longer service life of the machine.

Other premium features of the MAB 485 Magnetic Drilling And Tapping Machine are Full Wave Control Electronics for steady power output even while drilling, Magnetic Adhesion Indicator for safety, Overheat Protection which increases the life of the armature and the field coil, Reversible Motor for clockwise & counter-clockwise rotation which makes it easy for tapping (thread cutting). The MAB 485 Magnetic Drilling And Tapping Machine is our best selling machine in the German market.

The MAB 485 is also available with a swivel base option as model number MAB 485SB.

40 mm

Diameter Drilling

M 16

Tapping Capacity

1150 Watt

Powerful Motor

13 Kg

Weight

1-37/64"

15/16"

10.5 Amp

29 lbs.

Two stage oil bath gearbox

Full wave control electronics

Carbon brush wear control

Reversible motor

Magnet indicator

MT 2 Morse Taper

Safe switches

Complete internal cabling

1 Quick Change Drill Chuck

1 Tapping adapter ZGA 010 + ZGA 012 + ZGA 016

1 Ejector pin ZAK 075 + 100

1 Hard protective case

1 Safety chain

1 Drill drift MT 2

1 Gear rim drill chuck diameter 13 mm

1 Taper drift MT 2/B16

1 Operating manual

Product Videos