MABasic 450

MABasic 450

Ø 40 mm Core Drilling  & 55 mm Cutting Depth Magnetic Base Drill

Technical Specs

Core drill short 30 mm (1-3/16")
12-40 mm (1-37/64")
Core dril long 55 mm (2-11/64")
12-40 mm (1-37/64")
Core drill extra-long 110 mm (4-21/64")
----
Thread cutting
----
Countersinking
----
Reaming
----
Twist drilling
<= 18 mm (0-45/64")
Friction clutch
----
Permanent internal lubrication
Speed range 1
250 min -1
Speed range 2
450 min -1
Speed range 3
----
Speed range 4
----
Morse taper
Quick change drill chuck-system
----
Industrial arbor
MT 2 , 19 mm weldon
Direct arbor
Weight
13 Kg (28.6 lbs)
Magnet Size
84 x 168 x 41,5 mm
Stoke
160 mm (6-19/64'')
Voltage
230 V or 110 V AC
Motor Output
1150 Watt (10 Amp)
Swivel Base
----
Carbon brush wear control
----
CW/CCW rotation
----
Overheating protection
----
Magnet indicator
----
Full wave control electronics
----
Torque Control
----

The Made in Germany MABasic 450 Magnetic Base Drill is the most economically priced Morse Taper equipped machine from BDS Maschinen. The MABasic 450 magnetic base drill is a robust machine with Morse Taper 2 (MT2), thus the machine can also be used with taper shank conventional drill bits.

The MABasic 450 magnetic base drills' drilling capacity is 40 mm (Ø 1-3/4") diameter with annular cutters, 55 mm (2 11/64'') cutting depth and 16 mm (Ø 3/4") diameter with twist drills. We recommend the new ‘’BDS Twist Drills With Weldon Shank (SPS)’’ to be used with this magnetic base drill.

This magnetic base drill comes with a grease gearbox with two speeds, 250 RPM and 450 RPM respectively. The German make motor is 1150 Watts (10.5 Amp) and is available in 230 Volts and 10 Volts as per requirement.

Weighing just 13 Kg. (29 lbs.) the MABasic 450 magnetic base drill is attached with a coolant tank. The MABasic 450 magnetic base drill is delivered in a robust carry case.

40 mm

Diameter Drilling

55 mm

Cutting Depth

1150 Watt

Powerful Motor

13 Kg

Weight

1-37/64"

2-11/64"

10 Amp

28.6 lbs.

Core drills Ø 12 to Ø 40 mm

Twist drills up to Ø 18 mm

The practical carry case

Economical Price

MT 2 Morse Taper

Internal lubrication

Two speed gearbox

13 Kg

1 Industrial arbor ZIA 219 KN 19 mm Weldon 3/4"

1 Ejector pin ZAK 075

1 Cutting oil pump bottle ZKP 100

1 Plastic carry case

1 Safety lashing strap

1 Hexagon Offset screwdriver SW 4

1 Operating manual

Product Videos