MAB 855

MAB 855

(Limited stock available!)

Technical Specs

Core drill short 30 mm
12-75 mm
Core dril long 55 mm
12-75 mm
Core drill extra-long 110 mm
20 - 60 mm
Thread cutting
Twist drilling
<= 31.75 mm
Friction clutch
Permanent internal lubrication
Speed range 1
110 min -1
Speed range 2
175 min-1
Speed range 3
245 min-1
Speed range 4
385 min-1
Morse taper
MT 3
Quick change drill chuck-system
Keyless 19 mm
Industrial arbor
MT 3 , 19mm weldon
Direct arbor
25 Kg
Magnet Size
110 x 220 x 54 mm
255 mm
230 V or 110 V AC
Motor Output
1700 Watt
Swivel Base
Carbon brush wear control
CW/CCW rotation
Overheating protection
Magnet indicator
Full wave control electronics
Torque Control

The made in Germany 75 mm dia drilling with morse taper 3 heavy dutymagnetic drilling machine OVERHEAT PROTECTION - overheat protectionOne of the very useful feature of MAB 855 specially for new operator is the overheat protections Due overload or improper handling of the magnetic core drilling machine while drilling the magnetic core drilling machine may get heated and due to heat the motor may get damaged The BDS magnetic drilling magnetic core drilling machines protects the magnetic core drilling machine from overheat by shutting down the motor when the sensors senses overheat this prevents in damaging of the motor After the motor is shut down by the overheat protection keep the magnetic core drilling machine idle for 30 seconds to 1 minute and then run the run the motor again without drilling Run the motor for a minute and then start to drill again This feature increases the magnetic core drilling machine service life as well as avoids accidents


Diameter Drilling


Cutting Depth


Powerful Motor



Four-stage gearbox

Core drilling up to Ø 75 mm

Twist drilling up to Ø 31.75 mm

Permanent internal lubrication

safe switches

Complete internal cabling

Quick change drill chuck

Integrated cooling tank

1 Carry case on wheels

1 Safety chain

1 Offset screwdriver

1 Drill drift MT 3

1 Industrial arbor ZIA 319-KN

1 Ejector pin each ZAK 075, ZAK 090, ZAK 100, ZAK 120

1 Operating manual

Product Videos