MAB 465

MAB 465

Ø 40 mm Core Drilling & M16 Tapping Magnetic Drill Press

Technical Specs

Core drill short 30 mm (1-3/16")
Ø 12-40 mm (2-1/16")
Core dril long 55 mm (2-11/64")
Ø 12-40 mm (2-1/16")
Core drill extra-long 110 mm (4-21/64")
----
Thread cutting
< M16 (15/16")
Countersinking
<40 mm (2-1/16")
Reaming
<18 mm (5/8")
Twist drilling
<18 mm (5/8")
Friction clutch
----
Permanent internal lubrication
Speed range 1
50 - 250 min-1
Speed range 2
100 - 450 min-1
Speed range 3
----
Speed range 4
----
Morse taper
----
Quick change drill chuck-system
----
Industrial arbor
----
Direct arbor
19 mm Weldon
Weight
13 Kg (28.6 lbs)
Magnet Size
168 X 84 X 41.5 mm
Stoke
160 mm (6-19/64")
Voltage
230 V or 110 V AC
Motor Output
1150 Watt (10.5 Amp)
Swivel Base
Optional (MAB 465SB)
Carbon brush wear control
----
CW/CCW rotation
Overheating protection
Magnet indicator
Full wave control electronics
Torque Control
----

The Made in Germany, price economical magnetic drill press MAB 465, equipped for drilling and tapping operations. The MAB 465 magnetic drill press is an ideal machine for drilling, tapping, countersink and reaming, thanks to its reversible motor and variable speed control.

The lightweight MAB 465 magnetic drill press is equipped with 19 mm (3/4" ) Weldon direct arbor and a powerful magnet. The MAB 465 magnetic drill press is also equipped with an intelligent magnet adhesion indicator.

This portable magnetic drill press has complete internal cabling to avoid accidents while drilling overhead or in a horizontal position. The MAB 465 magnetic drill press comes with a price economical but powerful German-made grease gearbox motor.

The MAB 465 electromagnetic drill press can drill up to 40 mm (2-1/16") diameter in 55 mm cutting depth. The tapping capacity of the machine is M16 (15/16"). The MAB 465 magnetic drilling tapping machine is available in 230 V as well as in 110 Volts.

With the specially made ‘’BDS Twist Drills With Weldon Shank (SPS)’’, one can use the MAB 465 without any drill chuck adapter.

40 mm

Diameter Drilling

16 mm

Cutting Depth

1150 Watt

Powerful Motor

13 Kg

Weight

1-37/64"

15/16"

10.5 Amp

28.6 lbs.

Full wave control electronics

Reversible motor

Magnet indicator

Complete internal cabling

Overheat protection

Two-stage grease gearbox

Hexagonal offset screwdriver

2 ejector pins ZAK 075 + ZAK 100

Safety chain

Hard protective case

Operating manual

Product Videos