Gear Rim Drill Chuck For Magnetic Drills

Technical Specs

Gear rim drill chuck - MAB 100, MABasic 200, MABasic 400, AkkuMAB 3000 & AutoMAB 350/ZBI 113 & ZBI 116
Order No                                                 Description

ZBI

ZBI 113 Clamp Size : 1-13 mm

ZBI 116 Clamp Size : 2.5-16 mm


The ZBI Gear Rim Drill Chuck Is A Premium Drill Chuck For Using With Magnetic Drilling Machines Of All Types. The ZBI Drill Chuck Is Used With A Combination Of ZAP 100 Drill Chuck Adapter With Weldon Shank. The ZBI Drill Chuck Fits Into One End Of The ZAP 100 Drill Chuck Adapter And This Combination Can Then Be Attached To The Magnetic Drilling Machine With Weldon Shank Capacity. The Internal Thread Of ZBI Gear Rim Drill Chuck Is 1/2'' X 20 NF.


Please Note: BDS Has Developed Special Twist Drill Bits With Weldon Shank As A Standard Instead Of Straight Shank. These Special Twist Drill Bits With Weldon Shank Can Be Directly Used With A Magnetic Drilling Machine With Direct Arbour (Without Any Morse Taper). No Need For Using Any Kind O Adapter. The Article Number For The Special Twist Drill Bits With Weldon Shank Is SPS And Is Available From Diameter 6 mm To 14 mm.