KEYLESS Drill Chuck For Magnetic Drills

The KEYLESS drill chuck from BDS Machines is an innovative product patented by the Company to use with any Magnetic Drilling Machines.

The KEYLESS quick change drill chucks are also called Quick-Lock Arbors especially in the USA. The KEYLESS quick change drill chucks for magnetic drilling machines are used to attached annular cutters and twist drills with Weldon shaft on the magnetic drilling machines’ spindle.

Advantages of the KEYLESS quick change drill chucks for magnetic drilling machines:

  • Can be used with any magnetic drilling machine, radial drilling machine or conventional drilling machine with Morse Taper 2 or 3.
  • No need for screwing to tighten the annular cutters.
  • Independent of screws makes the cutter to fix reliably.
  • Internal lubrication provided KEYLESS quick change drill chucks for magnetic drilling machines.
  • Save time in changing annular cutters.
  • Avoid accidents due to loosing of screws.
  • Avoid tool breakage.

How to use the KEYLESS quick change drill chucks for magnetic drilling machines:

KEYLESS Drill Chuck For Magnetic Drills
Pull up the Keyless cap with one hand.
KEYLESS Drill Chuck For Magnetic Drills
Stop at the top end and don’t release the hand.
KEYLESS Drill Chuck For Magnetic Drills
With the other hand insert the annular cutter into the Keyless along with an ejector pin.
KEYLESS Drill Chuck For Magnetic Drills
Once the annular cutter is completely inside just soft release the hand from the Keyless cap.
KEYLESS Drill Chuck For Magnetic Drills
Done! it takes in total 5 seconds to clamp the annular cutter in the Keyless drill chuck.