With the purchase of BDS machine you have decided in favour of a quality product whose engineering and sturdiness have been de-signed to meet the high demands of day-to-day professional use. Read all the information contained here to familiarize yourself quickly with the machine and to be able to make full use of its functions. This machine will serve you for many years to come if you handle and treat it properly.
The BDS machines are highly recommended to be used only by skilled operators, operators with technical knowledge or operators with experience with drilling (or beveling) machine.
These operating instructions form an integral part of the BDS product and contains important information for the commissioning, safety, intended use and care of the machine. The operating instructions must be kept near the machine at all times. They must be read and observed by all persons entrusted with operation, troubleshooting and/or cleaning of the machine. Keep these operating instructions in a safe place and pass them on with the machine to any future owners.
All technical information, data and instructions for commissioning, operation and care of the machine contained in these operating instructions represent the latest status at the time of printing.
The manufacturer assumes no liability for damage or injury resulting from failure to observe the operating instructions, use for other than the intended purpose, unprofessional repairs, unauthorised modifications or use of non-approved spare parts and accessories, tools and lubricants.
Commonly, our tools are used on job sites in the most demanding applications and environments. Under these conditions and over time, the product may experience normal wear and tear and require service. While normal wear & tear is not considered a "defect" and is not covered.
Our products come with the promise of quality, and it is precisely for this reason that we offer you a free additional service: an extension of your power tool warranty to 1 years. With an extra charge. Your only requirement is to register your power tools within 6 months of the date you buy it.
Please pay attention to following: