HSS-Co 8 Series Annular Cutters

HSS-Co 8 Series Annular Cutters

Core drills with extra 8% Cobalt

HSS-Co 8 Series Annular Cutters

HIGH SPEED STEEL WITH 8% COBALT CORE DRILLS

Technical Specs

  •  
  • Quality
  • Article No
  • Cutting depth in mm
  • Diameter in mm
  • Weldon Shank
  • Ejector pin
  • Lubricant
  • Hardcoating
  • Short
  • HSS M42 Material
  • KBK - CO
  • 30 mm (1-3/16")
  • 12 - 60 mm (1/2" - 2 23/64'')
  • 19 mm ( 3 / 4 ")
  • ZAK 075
  • BDS 5000
  • ----
  • Long
  • HSS M42 Material
  • KBL - CO
  • 55 mm (2-11/64")
  • 12 - 60 mm (1/2" - 2 23/64'')
  • 19 mm ( 3 / 4 ")
  • ZAK 100
  • BDS 5000
  • ----

Box & Cassette Sets

  • HSS-Co 8 core drills short
    CORE DRILL CASSETTE

    KBK-CO 001 2 x KBK-CO 014

    2 x KBK-CO 018

    2 x KBK-CO 022

    1 x ZAK 075

  • HSS-Standard core drills short
    CORE DRILL CASSETTE

    KBK 001 2 x KBK 014

    1X KBK 18

    1X KBK 22

    1x ZAK 075

Explore

The Made in Germany HSS Cobalt Annular Cutters are made from special High-Speed Steel M42 with a higher percentage of Cobalt for greater heat resistance and wear protection.

M42 Cobalt Annular Cutters are also less prone to chipping when used for interrupted cuts and costs less when compared to the same annular cutter made of carbide. Annular Cutters made from cobalt-bearing high-speed steels can often be identified by the letters HSS-Co.

M42 is also less prone to chipping when used for interrupted cuts and costs less when compared to the same annular cutter made of carbide. Annular Cutters made from cobalt-bearing high-speed steels can often be identified by the letters HSS-Co.

The annular cutters of this series are characterized by high thermal resistance and wear protection.

BDS highly recommends using these annular cutters with our premium Cutting Oil For HSS Annular Cutters

The objective of this most recent product development at BDS was to produce a range of annular cutters optimized for power with greater heat resistance and better protection against wear.

The desired results were achieved by an enhanced proportion of cobalt in special steel. Combined with speed-controlled BDS magnetic drilling machines, these cobalt annular cutters are adapted for high loads in fine-grained steels and rust-proof materials.

The annular cutters can be reground (resharpen) whilst retaining their positive product characteristics.

KNOW HOW

  • Material
  • Steel<700 N/m
  • Steel<1000 N/m
  • Inox
  • Casting (depending on type)
  • Cutting Speed Of Machine
  • 10-15 RPM
  • 10-15 RPM
  • 10-15 RPM
  • 10-15 RPM
  • Coolant To Be Used
  • Cutting Oil BDS 5000
  • Cutting Oil BDS 5000
  • Cutting Oil BDS 5000
  • Cutting Oil BDS 5000

Product Videos

ACCESSORIES