MAH 485

MAB 485 SB

Ø 40 mm Core Drilling & M16 Tapping with Swivel Base

Technical Specs

360° 360°
Core drill short 30 mm
12-40 mm
Core dril long 55 mm
12-40 mm
Core drill extra-long 110 mm
----
Thread cutting
<= M16
Countersinking
<= 40 mm
Reaming
<= 18 mm
Twist drilling
<= 18 mm
Friction clutch
----
Permanent internal lubrication
Yes
Speed range 1
50 - 250 min-1
Speed range 2
180 - 450 min-1
Speed range 3
----
Speed range 4
----
Morse taper
MT 2
Quick change drill chuck-system
Keyless 19 mm
Industrial arbor
----
Direct arbor
----
Weight
13kg
Magnet Size
84 x 168 x 41,5 mm
Stroke
160 mm
Voltage
230 V or 110 V AC
Motor Output
1150 Watt
Swivel Base
Yes
Carbon brush wear control
Yes
CW/CCW rotation
Yes
Overheating protection
Yes
Magnet indicator
Yes
Full wave control electronics
Yes
Torque Control
Yes

The Made in Germany MAB 485 SB magnetic drill is the best introduction to the ProfiPLUS category magnetic drill- with the swivel base adjusting feature. Tangible relief for operators when performing drilling works overheard or in horizontal situations. A good idea comes to life: BDS now offers four magnetic drill s with a moveable magnetic adjustment feature in two performance categories. How the swivel base works: place the magnetic drill roughly in position, activate the magnet, release the adjustment feature and adjust it effortlessly. The swivel base enables the drill to be placed in exactly the right position without needing to hold the whole weight of the magnetic drill at the same time. This relief is an additional factor in work safety even when the magnetic drill is secured with a chain. The advantages of the MAB 485 Swivel Base magnetic drill Continuous electronic control of motor output and speed, drilling with core and twist drills, countersinking, reaming, thread cutting. Two-stage gear unit, non-destructive with oil bath gearbox. With Swivel Base, the adjustment feature for an easy positioning of the drill.

40 mm

Drilling Capacity

M 16

Tapping Capacity

1150 Watt

Powerful Motor

13 Kg

Weight

Swivel Base adjustment feature

Two-stage oil bath gearbox

Full wave control electronics

Reversible motor

Magnet indicator

MT 2 Morse Taper

Safe switches

Complete internal cabling

1 Quick change drill chuck

1 Tapping adapter ZGA 010 + ZGA 012 + ZGA 016

1 Ejector pin ZAK 075 + 100

1 Hard protective case

1 Safety chain

1 Drill drift MT 2

1 Gear rim drill chuck 1 – 13 mm

1 Taper drift MT 2/B16

1 Operating manual

Product Videos

GSW

Quick Change Drill Chuck For Taps

More info

GSE

Standard Quick Change Insert For THROUGH HOLE Tapping

More info

GSS

Quick Change Insert With Friction Clutch For BLIND HOLE Tapping

More info

ZGA

Economic Tap Adapter

More info

ZAP 200

19 mm Adapter

More info

ZAF 002

Internal Thread Adapter

More info

ZAF 003

Weldon to Quick-In Adapter

More info

ZAP 300

Core Drill Extension

More info

ZAF 005

One-Touch to Weldon Adapter

More info

ZAF 004

Quick-In to Weldon Adapter

More info

POW 100

PowerWORKER

More info

ZHS 006

Cutting Oil For HSS Core Drills

More info

ZHS 400

High-performance lubrication spray 5200

More info

ZHS 550

Cutting Paste For Tapping & Drilling

More info

ZHB 001

Cooling Lubricant Concentrate For TCT Core Drills

More info

ZSR 100

Spray cleanser 1000

More info

ZRO 250

Tube clamp for 80-250 dia. Tubes

More info

ZRO 500

Tube clamp for 150-500 dia. Tubes

More info

ZAV 400

Vaccum plate for smooth surfaces

More info

MBS 300

Magnetic Pillar

More info

ZBS 100

Industrial pillar

More info

ZMC 200

MobilCLAMP

More info

ZMS 500

MagnetCLAMP

More info

ZST 300

Prism Vise

More info

Site map