MAH 485

EKF 300.3

30° Chamfering

Technical Specs

360° 360°
Motor Output
1500 Watt
220 - 240 V AC
6000 min -1
Chamfer width
30 °
Angle adjustment
Millng Cutter
ZFR 300.3
Carbide reversing cutter
SHM 200
4,6 kg
Milling cutter

ZFR 300.3

Carbide reversible disks

SHM 200

Straight forward & easy Handling low weightVariable 3 milling cutters optionally 4530 or R 25 mmpowerful 15 kW motor Deburring and chamfering machines for quick and precise edge processing 20° 45° or R 25 mm Deburring and chamfering with machines from the EKF series The BDS deburring and chamfering machine can be universally used for industry and craft: In mould making boiler construction plant construction mechanical engineering and for sheet metal working The EKF machine is ideally suited for deburring and chamfering of parts made of steel stainless steel non-ferrous metals brass and plastic Due to its handy compact design the machine can be used on straight edges internal and external radii and for drill holes from ø 22 mm The fine adjustment allows slight chamfers for deburring up to the preparation of welding seams Three milling cutters with a chamfering angle of 45° optionally 30° or a radius of 25 mm are available The reversible disks can be used in 3 ways Due to the small guiding roller insertion into drill holes from ø 22 mm is possible without any problems Edge processing with the EKF - the workpiece is securely fixed with the MagnetCLAMP magnetic clamping device ZMS 500

1 Milling cutter

6 Carbide reversible disks

1 Jaw spanner SW 22

1 Carry case

1 Sickle spanner

1 Torx screwdriver T9

1 Operating manual

Product Videos

Milling cutter

ZFR 300.3

Carbide reversible disks

SHM 200

Site map